"no device drivers were found" when installing windows 10


A lot ofusers have sầu met this problem when they are trying khổng lồ install a new operating system on their computers from a USB flash drive: when they are lớn format the partitions before they move sầu on to lớn actually getting the new OS installed, they encounter the notification as shown above:

No device drivers were found. Make sure that the installation truyền thông contains the correct drivers, and then click OK.

Bạn đang xem: "no device drivers were found" when installing windows 10

There has not been a general fix-it-all solution to lớn this error, since the cause of this problem is still rather unclear. But there are indeed some effective sầu method that work for the majority of the users that you might want to lớn have a try.

So, please try the following methods until you locate the one that works for you.

Step 1: Try a different portStep 2: Get the right USB port driversOther options

Step 1: Try a different port

NOTE: This method is for users who are lớn install Windows 7 via a USB thumb drive sầu. This has been proved by a lot lớn be very effective.

1) When you met this problem, plug your USB flash drive out from its current port, then plug it into a different port, which should be a USB 2.0 port.

2) When you finish doing this,hit the OK button first to lớn shut down this notification window. Then cliông chồng the red X button on the top right cornerkhổng lồ cancel the installation.


3) Then you will see that you are bachồng lớn the interface where you are asked khổng lồ install Windows 7 from the top. Hit Install Now lớn begin.


4) Repeat the installation steps that you have sầu gone through before, & then you will see that you are in the interface where you are asked to choose where you want lớn install Windows. Choose the disk as per your need và then hit Next lớn continue.


5) Wait for the rest of the installation process khổng lồ finish.Step 2:Get the right USB port drivers

One of the reason why you encounter this problem could be that your computer has USB 3.0 ports, which are blue, & Windows 7 does not have sầu drivers for USB 3.0 built in.

This could render the failure in installation và make it impossible lớn use keyboards or mice for some users.

1) When you encounter this problem, cancel the installation first. Thenext thing you bởi vì is adding the necessary drivers to the installer.

2) Press Windows key & R at the same time, then type in devmgmt.msc & hit Enter. You will go to the Device Manager of your computer.


3) Expand category Universal Serial Bus controllers và check to see the USB driver that you are having now. As shown in the screenshot, I’m having the USB port driver from Hãng Intel, so I will tải về the lathử nghiệm driver for the USB 3.0 controllers from Hãng Intel.

Xem thêm: Download Dan The Man Mod Apk 1, Dan The Man Mod Apk (Infinity Money) V1


Alternatively, you can go khổng lồ the manufacturer website for your PC và type in the modal of your computer khổng lồ look for the appropriate USB 3.0 controllers driver.

4) When you locate the appropriate driver, download the thiết lập tệp tin & then extract the file to your installer USB. Then start the installation again.

5) Make sure that you have plugged your USB to the USB 2.0 port. When you are prompted with the error notification “No device drivers were found.“, click OK to cthua kém the window và then click Browse to look for the driver in your installer USB flash drive sầu.


6) The installation process should go with not further problems.

For users with Hãng sản xuất Intel NUC, here is a much much easier way to fix this problem.

Download USB 3.0 Creator Utility & then install asinstructed. Then your problem should be gone for good.

TIP: To save you tons of time from searching and downloading device drivers by yourself, why not give sầu a shot at Driver Easy, the automatic ONE-cliông chồng driver updater?


Other options

1) Change the ISO files. Some users find that the ISO files that they downloaded via Google Chrome was somehow flawed. After they changed to tải về path of the ISO & recreated the USB installer, this problem is gone.

2) Modify the BIOS.

Warning: Please only modify your BIOS only when you are fully aware of the consequences of faulty modification.

On some computers which have sầu only USB 3.0 ports and no USB 2.0 ports, which support only USB 2.0 devices, the work-arounds are a little bit more tricky.

You can tải về USB 3.0 Creator Utility as mentioned above sầu as an easy fix. But on some computers, users are required khổng lồ dive into the BIOS khổng lồ make some changes to lớn the BIOS. The changes include turning off USB 3.0 ports in BIOS. The specific procedures differ on different computers, and you might need khổng lồ consult your PC manufacturer for further assistance.

3) Use DVD to lớn install. Since this is only a problem occur when you are installing via USB, then the easy way out is to avoid using USB, which leave sầu you with installing via DVD. There is no need for you khổng lồ purchase one at full price, you can just borrow one from your friends và return it back after the install.

4) Install Windows 10 or Windows 8 instead. Windows 7 is out before USB 3.0 ports, so thereis a big chance that Windows 7 cannot be installed on computers with only USB 3.0 ports. In this case, why not consider installing Windows 10 or Windows 8? They are more powerful and more advancedregardless of some weird problems that occur from time to lớn time.